Angle Seat Valve
-
Pneumatic Filling Valve
Back- Technical Parameter
Working pressure: 0-0.8MPa(0-116psi)
Controlling pressure: 0.3-0.8Mpa(43.5-116psi)
Seal material: PTFE
Valve material:304/316/316L
Actuator material: Stainless steel
Controlling medium: Air/neutral gas
Applicable medium: Water, neutral gas or liquid, alcohol, oil, organic solvent, steam,dyestuff, acid-base solutions etc.
Medium temperature: -29℃—+200℃
Environment temperature: -10℃—+80℃
Connection: Thread
Leakage class: DIN EN 12266 A class
- Working Principle
In the non-working status, the valve is normally closed (open) due to spring force ,when actuator piston is compressed by air. The double-acting valve control by compressed air.
- Features
1. Small and delicate shape, New model weight components, compact structure.
2. High flow rate,low fluid resistance, Y-type design increases 30% flow rate.
3. Easy installation: Actuator 360°rotated free.
4. Variety control mode: Double-acting, inside cover, outside cover.
5. Automatically position correction, Self-lubricating PTFE seal, maintenance-free, good stability.
6. Multi actuators to adapt different working status, normal, high temperature, heavy corrosion, etc.
7. Start frequently for a short time, high sensitivity. Precise temperature control, drip with liquid.
8. No residue.
Address：
Fax:
Tel:
E-mail:
Phone:
Power By BOC
