Angle Seat Valve
-
Pneumatic Angle Seat Valve
Back- Technical Parameter
Working pressure: 0-1.6MPa(0-232psi)
Controlling pressure: 0.3-0.8Mpa(43.5-116psi)
Seal material: PTFE
Valve body material: 304/316/316L
Actuator material: Stainless steel, Aluminum, Engineering plastic
Function: Normal open, Normal closed, Double-acting, Free status
Controlling medium: Air/neutral gas
Applicable medium: Water, neutral gas or liquid, alcohol, oil, organic solvent, steam, dyestuff, acid-base solutions etc.
Medium viscosity: Max600mm²/s
Medium temperature: -29℃—+200℃
Environment temperature: -10℃—+80℃
Connection: Thread, welding, flange, tri-clamp
A :upstream installation /B :downstream installation
Leakage class: DIN EN 12266 A class
- Working Principle
In the non-working status, the valve is normally closed (open) due to spring force ,when actuator piston is compressed by air. The double-acting valve control by compressed air.
- Features
1. High flow rate,low fluid resistance, Y-type design increases 30% flow rate.
2. Position indicator: The limit switch and emergency manual are adaptable.
3. Easy installation: Actuator 360°rotated free.
4. Automatically position correction, Self-lubricating PTFE seal, maintenance-free, good stability.
5. Multi actuators to adapt different working status, normal, high temperature, heavy corrosion, etc.
6. Long working life.
7. High-frequency switch, High sensitivity.
- Actuators application field
Apply to different circumstances Actuator material Corrosion resistance Ambient temperature Pros and Cons 
Stainless steel Extremely strong High temperature Apply to all extreme environments
Aluminum Strong High temperature Treated with salt spray
Apply to medium and low corrosion environment
Plastic Extremely strong Medium-high temperature Unique piston design
Guarantee long-term trouble-free work
Address：
Fax:
Tel:
E-mail:
Phone:
Power By BOC
